梯级溃坝洪水洪峰增强机制

我国在多条河流上修建了大量梯级水库, 梯级坝溃决诱发洪水大大超过单坝溃决洪水洪峰, 因此亟需加深对梯级坝溃决洪水洪峰增强机制的认识. 本文建立了梯级坝溃决洪水演进过程的一维浅水动力学模型, 发展了一套能捕捉激波、干湿边界和保平衡结构的数值求解方法, 通过大量算例, 系统研究了梯级坝溃决洪水演进过程的质量转化和能量转化机制. 研究结果表明, 梯级溃决中, 上游溃决诱发的洪水大大增大下游水库的质量和动量, 形成一个带动量的水塔, 同时在尾部残留一个动量较大的射流, 不断补充下游坝体溃决后水塔的质量和动量, 持续维持洪峰高度. 根据该射流-水塔机制, 建立了梯级坝溃决洪水演进过程对应的射流-水塔单坝溃决洪水过程等效模型, 该等效模型基本反映了梯级坝溃决诱发洪水的洪峰过程, 并成功预测了多个坝间距为百公里量级的梯级坝溃决洪水洪峰高程和流量, 可望为流域防洪和梯级坝设计提供理论依据.      

Biomimetic Approach for Highly Selective Artificial Water Channels Based on Tubular Pillar[5]arene Dimers

Artificial water channels mimicking natural aquaporins (AQPs) can be used for selective and fast transport of water. Here, we quantify the transport performances of peralkyl-carboxylate-pillar[5]arenes dimers in bilayer membranes. They can transport ≈10⁷ water molecules/channel/second, within one order of magnitude of the transport rates of AQPs, rejecting Na⁺ and K⁺ cations. The dimers have a tubular structure, superposing pillar[5]arene pores of 5 Å diameter with twisted carboxy-phenyl pores of 2.8 Å diameter. This biomimetic platform, with variable pore dimensions within the same structure, offers size restriction reminiscent of natural proteins. It allows water molecules to selectively transit and prevents bigger hydrated cations from passing through the 2.8 Å pore. Molecular simulations prove that dimeric or multimeric honeycomb aggregates are stable in the membrane and form water pathways through the bilayer. Over time, a significant shift of the upper vs. lower layer occurs initiating new unexpected water permeation events through toroidal pores.     

三缺位硅钨酸盐纳米材料的调控形貌的合成及功能化

以三缺位Keggin型硅钨酸盐为前驱体,采用化学沉淀法成功合成出2例新型纳米材料M_3SiW_9(M=Cu.,Co.)。其中,Cu_3SiW_9表现为新颖的纳米晶须形貌,Co_3SiW_9表现为尺寸均一的球形纳米颗粒。经过一系列控制实验证明,通过掺杂不同类型的金属离子可以调控M_3SiW_9的形貌。我们对产生该现象的机理进行了合理推测。此外,使用荧光素钠作为掺杂剂可使Cu_3SiW_9纳米晶须具有优良的光致发光性能,测试表明,多酸并未淬灭荧光素钠的发光,复合材料在510 nm具有明显的发射波长。最后,我们对Cu_3SiW_9纳米晶须负载CdS量子点后的光催化产氢性质进行了研究。结果表明,当Cu_3SiW_9与CdS的质量比为1∶1时,复合材料的产氢效率约为纯CdS量子点的10倍。这也证实多金属氧酸盐的存在可以有效抑制CdS量子点光生电子与空穴的复合,从而大幅提高其光解水产氢的效率。     

Nickel (II) tetrapyridyl complexes as electrocatalysts and precatalysts for water oxidation

Two nickel complexes, [Ni(tpen)](ClO₄)₂.0.5CH₃COCH₃ ( 1 ) and [Ni(tpbn)](ClO₄)₂ ( 2 ), of tetrapyridyl ligands N,N,N′,N′-tetrakis(2-pyridyl-methyl)-1,2-ethanediamine (tpen) and N,N,N′,N′-tetrakis(2-pyridyl-methyl)-1,4-butanediamine (tpbn) were prepared and their catalysis for water oxidation reaction (WOR) studied. In 0.1 M phosphate buffer solution (PBS) of pH 8.0, complex 1 is a homogeneous molecular catalyst with an overpotential of ~440 mV and a Faradaic efficiency of 89%. At pH ≥ 9.0, complex 1 degraded gradually during the catalytic process and formed NiO_x composite (nickel oxide with general formula Ni_xO_yH_z) active for WOR. In contrast, complex 2 deteriorated under measured conditions (pH 8.0–12.0) and formed NiO_x composite active for WOR. The NiO_x composite derived from 1 in 0.1 M PBS at pH 11.0 showed an activity with an overpotential of ~500 mV, a Tafel slope of ~90 mV/decade and a Faradaic efficiency of 97%. Mechanisms were proposed for water oxidation catalyzed by 1 and 2 . This work revealed that the catalytic activity of the nickel complexes was related to the flexibility of the tetrapyridyl ligands and the adaptability of the coordination sphere of the nickel(II) center.     

What is the form of muscimol from fly agaric mushroom (Amanita muscaria) in water? An insight from NMR experiment supported by molecular modeling

The biologically active alkaloid muscimol is present in fly agaric mushroom (Amanita muscaria), and its structure and action is related to human neurotransmitter _γ-aminobutyric acid (GABA). The current study reports on determination of muscimol form present in water solution using multinuclear ¹H and ¹³C nuclear magnetic resonance (NMR) experiments supported by density functional theory molecular modeling. The structures of three forms of free muscimol molecule both in the gas phase and in the presence of water solvent, modeled by polarized continuous model, and nuclear magnetic isotropic shieldings, the corresponding chemical shifts, and indirect spin–spin coupling constants were calculated. Several J-couplings observed in proton and carbon NMR spectra, not available before, are reported. The obtained experimental spectra, supported by theoretical calculations, favor the zwitterion form of muscimol in water. This structure differs from NH isomer, previously determined in dimethyl sulfoxide (DMSO) solution. In addition, positions of signals C3 and C5 are reversed in both solvents.     

Optimization of anionic conductivity through the coexistence of ionomer cluster and backbone-backbone morphologies in anion exchange membranes

Random copolymers of poly(4-vinylpyridine) and polyisoprene were synthesized, and subsequently quaternized with 1-alkylbromides. The number of carbons on the pendant side-chain of the resultant comb-shaped polymer, n, ranged from 2–8. The comb-shaped polymers were crosslinked employing thiol-ene chemistry to give mechanically robust ion conducting membranes. Analysis by wide and medium-angle X-ray scattering show three morphology regimes that are dependent on the number of carbons on the pendant side-chains. When n = 2, ionomer cluster morphology was dominant, when n = 8 backbone-backbone morphology was dominant, and when n = 3–6, the membrane showed a coexistence of both ionomer cluster and backbone-backbone morphologies. Evaluation of the water uptake of the membranes showed a maximum water uptake per cation of 9.5 when n = 5 at 95% relative humidity (RH) and 60°C. Conductivity of the samples characterized by electrochemical impedance spectroscopy showed bromide conductivity as high as 110 mS/cm when n = 3 at 95% RH and 90°C.     

Rapid analysis of ultraviolet filters using dispersive liquid–liquid microextraction coupled to headspace gas chromatography and mass spectrometry

An ionic‐liquid‐based in situ dispersive liquid–liquid microextraction method coupled to headspace gas chromatography and mass spectrometry was developed for the rapid analysis of ultraviolet filters. The chemical structures of five ionic liquids were specifically designed to incorporate various functional groups for the favorable extraction of the target analytes. Extraction parameters including ionic liquid mass, molar ratio of ionic liquid to metathesis reagent, vortex time, ionic strength, pH, and total sample volume were studied and optimized. The effect of the headspace temperature and volume during the headspace sampling step was also evaluated to increase the sensitivity of the method. The optimized procedure is fast as it only required ∼7–10 min per extraction and allowed for multiple extractions to be performed simultaneously. In addition, the method exhibited high precision, good linearity, and low limits of detection for six ultraviolet filters in aqueous samples. The developed method was applied to both pool and lake water samples attaining acceptable relative recovery values.     

The kinetics of solid-phase microextraction measured for freshly added and aged hydrophobic compounds in two different soils

The proper choice of exposure times is critical if the freely dissolved concentration of chemicals in soil porewater is to be measured via the equilibrium solid-phase microextraction (SPME) as the times to equilibrium may vary depending on compound and soil properties. To reveal the effects of compound hydrophobicity, ageing and soil organic matter content on times to equilibrium, the SPME uptake was measured for five freshly added and aged hydrophobic organic compounds (phenanthrene, pyrene, lindane, p,p′-DDT and polychlorinated biphenyl (PCB) 153) in two contrasted soils (arable and forest soil). The tested compound-soil systems behaved kinetically different. Longer equilibrium times were observed with increasing hydrophobicity of compounds for aged compared to freshly added chemicals and for the forest soil in comparison to the arable soil. The calculated soil–porewater partition coefficients (i.e. sorption coefficients, K_d) of chemicals differed between soil types mainly due to various organic carbon (OC) contents as evidenced by the comparable K_oc values (i.e. K_d values normalised to soil OC content). Similar K_oc values were also found with the various extent of ageing, indicating that both the freshly added and aged compounds linearly partitioned between the soil organic matter and porewater. Our results suggest that, for a respective compound, variations in equilibrium times may be expected depending upon the residence time and the organic matter content in soil where the longest equilibrium times seems to appear for a combination of aged compounds and high organic soils. With regard to this outcome, the effect of the level of sample depletion due to the SPME extraction (LD_SPME) on equilibrium times was assessed. At LDs_SPME of up to 10%, equilibrium times increases linearly with LDs_SPME for p,p′-DDT and PCB 153. For phenanthrene (LD_SPME<10%), and for lindane and pyrene (1.2% < LD_SPME > 40%), no clear relationships were observed.     

Enhancing the Water Stability of Al‐MIL‐101‐NH2 via Postsynthetic Modification

The resistance of metal–organic frameworks towards water is a very critical issue concerning their practical use. Recently, it was shown for microporous MOFs that the water stability could be increased by introducing hydrophobic pendant groups. Here, we demonstrate a remarkable stabilisation of the mesoporous MOF Al‐MIL‐101‐NH₂ by postsynthetic modification with phenyl isocyanate. In this process 86 % of the amino groups were converted into phenylurea units. As a consequence, the long‐term stability of Al‐MIL‐101‐URPh in liquid water could be extended beyond a week. In water saturated atmospheres Al‐MIL‐101‐URPh decomposed at least 12‐times slower than the unfunctionalised analogue. To study the underlying processes both materials were characterised by Ar, N₂ and H₂O sorption measurements, powder X‐ray diffraction, thermogravimetric and chemical analysis as well as solid‐state NMR and IR spectroscopy. Postsynthetic modification decreased the BET equivalent surface area from 3363 to 1555 m² g^?1 for Al‐MIL‐101‐URPh and reduced the mean diameters of the mesopores by 0.6 nm without degrading the structure significantly and reducing thermal stability. In spite of similar water uptake capacities, the relative humidity‐dependent uptake of Al‐MIL‐101‐URPh is slowed and occurs at higher relative humidity values. In combination with ¹H‐²⁷Al D ‐HMQC NMR spectroscopy experiments this favours a shielding mechanism of the Al clusters by the pendant phenyl groups and rules out pore blocking.     

A stable pillared metal–organic framework constructed by H4TCPP ligand as luminescent sensor for selective detection of TNP and Fe3+ ions

A novel luminescent metal–organic framework ( Zn‐TCPP/BPY ) with pillared structure based on 2,3,5,6‐tetrakis(4‐carboxyphenyl)pyrazine (H₄TCPP) and 4,4′‐bipyridine (BPY) has been designed and synthesized through a solvothermal reaction. The [Zn₂(COO)₄] paddlewheel units are linked by TCPP^4? ligands to form two‐dimensional layers and further connected by BPY ligands as pillars to construct the twofold interpenetrating three‐dimensional framework. Interestingly, Zn‐TCPP/BPY possesses outstanding stability in organic solvents and water as well as maintains its structural rigidity in aqueous solutions of different pH values (3–12). After activation, Zn‐TCPP/BPY possesses permanent porosity with Brunauer–Emmett–Teller surface area of 630 m² g^–1. Remarkably, Zn‐TCPP/BPY displays excellent fluorescent property in virtue of the aggregation‐induced emission effect of the H₄TCPP ligand, which can be highly active and quenched by small amounts of 2,4,6‐trinitrophenol (TNP) and Fe³⁺ ions. Furthermore, the detection effect of Zn‐TCPP/BPY remains basically the same even after five cycles. The excellent stability, high sensitivity, and recyclability of Zn‐TCPP/BPY make it an outstanding chemical sensor for detecting TNP and Fe³⁺ ions.